Selling BMS service - tiers, SLAs and the annual review
Many systems integrators treat service as the work that happens after the real project is finished. Done well, it is much more than that: steady recurring income, a close relationship with the client and the most reliable source of future project work. Done badly, it is a low-margin contract that the client cuts as soon as budgets tighten.
This guide is about the business side of BMS service: how to package it, what to promise, how to price it and how to keep it growing. It reflects common practice in the industry rather than any single model - adapt it to your clients and your team.
The market backdrop is encouraging. Industry figures from the BCIA show service and maintenance is about a quarter of the UK building controls market and still growing while the market as a whole is flat - and system installers already earn most of that service revenue.
| Shares | |
|---|---|
| Service and maintenance - share of the 2025 market (£220.1m of £840.4m) | 26% |
| System installers - share of controls service revenue (Q1 2026) | 84.1% |
| Growth in 2025 | |
| Service and maintenance | +2.1% |
| Whole controls market | +0.1% |
Read the Q1 2026 segment figures with care - they add up to more than the stated total.
Why clients cut service contracts
Before designing a service offer, it is worth understanding why existing ones get cut. The usual reasons:
- The client cannot see what they are paying for. Visits happen, sheets are signed, nothing visibly changes.
- The service is the same every visit. Four identical walk-rounds a year feel like a cost, not a benefit.
- Problems still happen. If the client still has comfort complaints and alarm floods, they wonder what the contract is for.
- Nobody talks about value. The only conversation is the renewal price.
Each of these is fixable, and fixing them is what turns a service contract into an asset.
Three service tiers
A common and workable shape is three tiers, each building on the one before. Names vary; the structure is what matters.
Essential
- planned visits through the year, timed to the seasons;
- a tested backup of the BMS at each visit;
- a written report after every visit;
- responsive call-outs, charged or included as agreed.
Enhanced - everything in Essential, plus:
- remote monitoring of the system between visits;
- alarm handling in working hours;
- seasonal recommissioning at spring and autumn changeover;
- agreed response times by priority.
Optimise - everything in Enhanced, plus:
- fault detection and analytics on trend data;
- a monthly energy and fault report;
- a quarterly review meeting with the client;
- an agreed number of optimisation hours to act on findings;
- a savings target tracked with weather-corrected metering and CUSUM.
Most clients start in the middle. The top tier gives larger clients a clear path to more value, and the bottom tier keeps cost-sensitive clients on a planned footing rather than call-out only.
What to put in an SLA
A service level agreement sets out what the client can expect. Keep it clear and measurable:
- response times - how quickly you will respond to a call, by priority;
- attendance times - how quickly an engineer will be on site, by priority, where attendance is needed;
- remote first response - what you will do remotely before attending, and when;
- backup and restore - how often backups are taken, where they are kept and how quickly the system can be restored;
- reporting - when visit reports and monthly reports will be delivered;
- hours of cover - working hours, extended hours or round the clock;
- exclusions - what is not covered, such as plant faults outside the controls, or damage.
Only promise what your team can reliably deliver. A missed SLA damages trust more than a modest one that is always met.
Response priorities
Response priorities should match the alarm priorities on the system, so everyone uses the same language. A typical scheme:
- Priority 1 - critical: risk to safety, plant protection or business-critical operations. Immediate remote response and urgent attendance.
- Priority 2 - urgent: loss of comfort or a failure that will worsen. Same-day response.
- Priority 3 - routine: faults that can wait for a planned visit or scheduled attendance.
- Priority 4 - improvements and requests: handled through the review process.
Agree the definitions with each client. What is critical in a hospital or data hall is different from what is critical in an office. See Alarm rationalisation for building the same scheme into the alarms themselves.
Pricing approaches
There is no single right way to price service, but most approaches combine a few elements:
- a fixed annual fee for planned visits, remote monitoring and reporting, based on the size and complexity of the system;
- included responsive hours, or responsive work charged at agreed rates;
- optimisation hours as a block within the top tier, with additional hours at an agreed rate;
- parts, either excluded, included up to a limit, or included in full at a higher fee.
Things that drive the price include the number of controllers and points, the number of sites, the age and support status of the system, the hours of cover and the reporting required. Many integrators price the first year after a health check, so the scope is based on what is really there.
Some clients ask for savings-linked pricing. It can work, but only with a properly agreed baseline and measurement method - see Proving savings - and a clear understanding of what is outside your control.
Align with the client's maintenance standard
Many facilities management contracts specify maintenance to SFG20, the UK maintenance schedule standard published by BESA. If your client's FM contract does, your BMS service offer should map onto the relevant SFG20 schedules, with the client agreeing any tailoring for criticality. BSRIA's BMS Maintenance Guide (BG 4/2003) is a long-standing reference aimed at the people who procure BMS maintenance, and it includes model specification material. Both are paid publications; refer to them directly rather than relying on summaries.
The annual review meeting
The annual review is the most important meeting in the service year, and it should not be about the renewal price. Cover:
- what was done - visits, call-outs and fixes, in summary;
- what was found - the main findings and their status;
- what changed - energy and alarm trends over the year, with before-and-after evidence;
- what is left - outstanding findings and the risks they carry;
- next year's plan - the seasonal programme and the proposed improvement projects.
Bring a one-page summary the client can forward to their finance director. If the review shows value clearly, the renewal largely takes care of itself.
The improvement pipeline
Every service visit produces findings. Some are fixed on the day; others need budget. Keep these in a findings register with a priority, an estimated cost and, where appropriate, an estimated saving and payback.
Over the year the register becomes a pipeline of improvement projects: sensor replacements, drive retrofits, metering upgrades, controller or head-end replacements, or moving the building up a BACS efficiency class under BS EN ISO 52120-1. Presenting them at the annual review, with evidence from the year's trends, is far more persuasive than a cold proposal. Keep estimates honest - say how they were worked out, and avoid promising savings the data does not support.
Renewals
Make renewal easy:
- start the conversation well before the contract ends;
- base it on the annual review, not just the price;
- offer a step up a tier where the evidence supports it;
- keep the paperwork simple.
Clients renew what they can see. A year of clear reports, honest findings and visible improvements is the strongest renewal argument there is.
Further reading
The day-to-day content of a service programme is in The BMS service visit that pays for itself and Seasonal changeover. Fault detection on a BMS covers the analytics behind the top tier. For the technical foundations, see Commissioning a BMS and Where BMS tuning saves energy. Sector angles are in Theatre ventilation setback under NETB 2026/1, Term time, holidays and CO2, Optimisation for landlords and Data hall cooling inside the envelope.
Related tools: the energy savings, out-of-hours running cost, VSD savings and project payback calculators in tecTools help put figures to findings. On sites running tecGfx, work orders, planned maintenance and reports sit alongside the building's alarms and analytics, which helps when pulling a year's evidence together.
Published guidance mentioned: SFG20 maintenance schedules (BESA); BSRIA BG 4/2003 BMS Maintenance Guide; BS EN ISO 52120-1:2022. These are described here in our own words - refer to the publications themselves for their content.